Wireless Power Transmission

Wireless power transmission has been a dream since the days when Nikola Tesla imagined a world studded with enormous Tesla coils. But aside from advances in recharging electric toothbrushes, wireless power has so far failed to make significant inroads into consumer-level gear.
What is it?
This summer, Intel researchers demonstrated a method–based on MIT research–for throwing electricity a distance of a few feet, without wires and without any dangers to bystanders (well, none that they know about yet). Intel calls the technology a “wireless resonant energy link,” and it works by sending a specific, 10-MHz signal through a coil of wire; a similar, nearby coil of wire resonates in tune with the frequency, causing electrons to flow through that coil too. Though the design is primitive, it can light up a 60-watt bulb with 70 percent efficiency.

When is it coming?

Numerous obstacles remain, the first of which is that the Intel project uses alternating current. To charge gadgets, we’d have to see a direct-current version, and the size of the apparatus would have to be considerably smaller. Numerous regulatory hurdles would likely have to be cleared in commercializing such a system, and it would have to be thoroughly vetted for safety concerns. Assuming those all go reasonably well, such receiving circuitry could be integrated into the back of your laptop screen in roughly the next six to eight years. It would then be a simple matter for your local airport or even Starbucks to embed the companion power transmitters right into the walls so you can get a quick charge without ever opening up your laptop bag.

Advertisements